Email Address

[email protected]

Phone Number

+0086-371-86162511

replacing coarse and fine aggregates to steel slag

Get In Touch

STUDY ON CONCRETE USING STEEL SLAG AS COARSE

tocodal provisions IS 2386:1963and the results are The results showed that replacing about 60 percent of given in tables. steel slag aggregates for coarse aggregate and 40 Steel slag: The steel slag used here is an air cooled percent of ecosand for fine aggregate will not have any slag and is collected from Dennis steel plant at adverse effect

Get Quote

Partial replacement of fine aggregate by steel slag and

Jan 01, 2021· In this study, the replacement was done with fine aggregate by steel slag for different proportions of 0%, 10%, 20%, 30%, 40%&50% and coarse aggregate by walnut shell at constant proportion of 20%. M30 grade of concrete is used for a water cement ratio of 0.45.

Get Quote

ASSESSMENT OF STEEL SLAG AS REPLACEMENT FOR COARSE

66.67% steel slag aggregates as a replacement of the coarse aggregate. Qurishee et al.(2016) in their experimental study on the use of slag as coarse aggregate and its effect on mechanical properties of concrete. It was reported that compressive strength of concrete made by replacing coarse aggregate with slag is higher than normal conventional

Get Quote

STEEL SLAG AS REPLACEMENT OF FINE AGGREGATE IN

STEEL SLAG AS REPLACEMENT OF FINE AGGREGATE IN TERMS OF HIGH STRENGTH CONCRETE Anurag Jain *1, Sandeep Gupta*2 & Mayank Gupta*3 * Civil Engineering SIRTE, BHOPAL M.P. (INDIA) DOI: 10.5281/zenodo.1165760 ABSTRACT The Steel slag, a result of steel making, is delivered amid the detachment of molten steel from polluting influences

Get Quote

Study on the partial replacement of fine aggregate using

containing steel slag aggregate after high temperature exposure studied the properties of four steel slag based concrete mixtures with different types of cement pastes prior and after heating up to 800°C. The percentage replacement of fine aggregate using steel slag was adopted to be 60 percent. Dolomite based concrete mixture

Get Quote

Experimental Investigation Of Coarse Aggregate With Steel

replacement of coarse aggregate, fine aggregate and cement. Its performance as a coarse aggregate replacement has been found to be non-satisfactory because of strength regression and expansion due to alkali-silica reaction. The research shows that there is strength loss due to fine aggregate substitution also. Efforts have been made in

Get Quote

Usage of steel slag in concrete as fine and/or coarse

In this study, the use of steel slag as fine and/or coarse aggregate in concrete is investigated. For this purpose, 12 different concrete mixtures with different water/cement ratios of 0.40, 0.55 and 0.70 which include steel slag aggregate as fine and/or coarse aggregate are prepared.

Get Quote

STEEL SLAG AS REPLACEMENT OF FINE AGGREGATE IN

STEEL SLAG AS REPLACEMENT OF FINE AGGREGATE IN TERMS OF HIGH STRENGTH CONCRETE Anurag Jain *1, Sandeep Gupta*2 & Mayank Gupta*3 * Civil Engineering SIRTE, BHOPAL M.P. (INDIA) DOI: 10.5281/zenodo.1165760 ABSTRACT The Steel slag, a result of steel making, is delivered amid the detachment of molten steel from polluting influences

Get Quote

Properties of Concrete Manufactured Using Steel Slag

Jan 01, 2014· This paper aims to study experimentally, the effect of partial replacement of coarse and fine aggregates by steel slag (SS), on the various strength and durability properties of concrete, by using the mix design of M20 grade. The optimum percentage of replacement of fine and coarse aggregate by steel slag is found.

Get Quote

Experimental Study on Replacement of Coarse Aggregate by

Jul 30, 2018· Reviews of literature survey are presented as below, [1] studied to reduce a fine aggregate by the replacement of weld slag 5%, 10% and 15%. The optimum compressive. strength of the concrete is 41 N/mm2 for 5% WS and 39.7N/mm2 for 10% replacement. [2] carried out the study to replace the aggregates (coarse and fine ) with the industrial slag

Get Quote

Study on the partial replacement of fine aggregate using

containing steel slag aggregate after high temperature exposure studied the properties of four steel slag based concrete mixtures with different types of cement pastes prior and after heating up to 800°C. The percentage replacement of fine aggregate using steel slag was adopted to be 60 percent. Dolomite based concrete mixture

Get Quote

ASSESSMENT OF STEEL SLAG AS REPLACEMENT FOR

66.67% steel slag aggregates as a replacement of the coarse aggregate. Qurishee et al.(2016) in their experimental study on the use of slag as coarse aggregate and its effect on mechanical properties of concrete. It was reported that compressive strength of concrete made by replacing coarse aggregate with slag is higher than normal conventional

Get Quote

Experimental Investigation Of Coarse Aggregate With Steel

replacement of coarse aggregate, fine aggregate and cement. Its performance as a coarse aggregate replacement has been found to be non-satisfactory because of strength regression and expansion due to alkali-silica reaction. The research shows that there is strength loss due to fine aggregate substitution also. Efforts have been made in

Get Quote

Vol. 3, Issue 4, April 2014 Utilization Of Steel Slag In

replacing the fine aggregates by 10%, 20%, 30%, 40% and 50% with steel slag is studied after 28 days of curing. For the test specimens, 43 grade ordinary Portland cement, natural river sand and coarse aggregate, steel slag from steel plants is

Get Quote

Use of Steel Slag in Concrete as Fine Aggregate

Portland cement, as fine and coarse aggregates, to name a few. But steel slag has a negative impact on the environment when disposed. In that case wide variety of use of steel slag becomes relevant. Along with the diversified uses, steel slag efficiently replaces natural aggregates both coarse and fine

Get Quote

Replacing of Energy Optimizing Furnace Slag as a Fine

Keywords: Concrete, Steel slag, Fine aggregate, Coarse aggregate, Portland cement 1.INTRODUCTION In construction industry concrete is the largest produced material. In India alone, every year hundreds of million cubic meters of concrete is consumed. Concrete is made up of coarse and fine aggregates gluedtogether by binding material.

Get Quote

Use of copper slag as a replacement for fine aggregate in

ordinary Portland cement, fine aggregate, 10mm coarse aggregate and copper slag. The ratios of copper slag to fine aggregate were 0%, 40% and 80%. Four-8mm diameter high yield steel bars were used as longitudinal reinforcement and 6mm diameter mild steel bars were used as stirrups. Three

Get Quote

Experimental Investigation on Partial Replacement of

Experimental Investigation on Partial Replacement of Natural Fine Aggregate by Steel Slag and Natural Coarse Aggregate by Waste Limestone Aggregate in Cement Concrete Md Zeeshan1 Prof. Rohan S Gurav2 Prof. Brij Bhushan S3 Prof. Maneeth P D4 1M. Tech Student 2,3,4Assistant Professor 1,2,3,4Department of Construction Technology

Get Quote

Experimental Study on Partial Replacement of Fine

effective percentage of replacement of fine aggregate by steel slag is then found forM20 grade concrete. Name of the Quantity of the material Fine Aggregate with Coarse Aggregate Water 1 Cube 1.5 1.98 4.92 0.75 Sl.no Name of the mould Quantity of the material Cement ‘kg’ Fine Aggregate with steel slag Coarse Aggregate Water

Get Quote

Performance of Stainless Steel Slag in Concrete Structures

obtained at a replacement of 25% of stainless steel slag by cement and 25% of stainless steel slag by fine aggregate and 100% of coarse aggregate. The stainless steel slag concrete made with the optimum strength gained replacements. The strength of the stainless steel slag concrete at an age of 7 days 14 days and 28 days are

Get Quote

partial replacement of cement with steel mill

Partial Replacement Of Fine Aggregate Using Steel Slag. Steel slag as partial replacement of fine aggregate for this purpose different test on harden concrete were conducted at the age of days like compressive strength on x x mm size cube, splitting tensile strength on mm x mm cylinder,

Get Quote
Latest News